Step
By
Step
CLEAN
1
SET POWER & FREQUENCY
After setting up a safe working environment, turn on the Laser Technologies Fibre Laser Cleaner and set power & frequency. These settings depending on material & metal to be cleaned.
2
SET BLASTER FOCUS & DEPTH
Adjust the Blaster focus & depth for target area to be cleaned with the Laser Technologies Fibre Laser Cleaner.
3
READY AIM CLEAN
Aim Blaster at surface to be cleaned and pull trigger. For best results use a 45º angle at between 150-200mm distance.
4
THE RESULTS
Enjoy One-Pass Cleaning that removes Dirt & Oxide layers on a range of metals and reveals a substrate ready to be treated & protected to prevent further corrosion.
